★water heaters
one of the most common questions we receive is “can Bartok design supply tubs with a system to keep the water warm all the time?”
The short answer is: NO.
We are makers of Japanese wooden bathtubs.
If we were selling how water or spa system we would just be resellers of some other company product.
Moreover, we would not be able to supply spare parts or maintenance services.
To keep the water warm, there are basically 4 options:
1) Add hot water
Simple as the title, you drain some lukewarm water and add some 60-70 C. hot water to raise the average temperature. Pay attention not to get scalded!
2) Ask a local SPA or POOL equipment company
A re-circulation system consists of a small pump, a cartridge filter, a gas or heat pump operated post-water-heater and optionally a water sanitizing system (UV or Ozone. Chlorine is not good for the wood)
3) Ask Rinnai
Rinnai is one of the main gas domestic equipment makers in Japan and in recent years they started an aggressive expansion policy overseas. Rinnai offers “on-demand” gas-operated how water heaters.
“instant” or tankless “tankless” is just another way to call them.
Differently from other makers, Rinnai hot water heaters can be equipped with an option to also reheat the water with the very same equipment. This is the option (almost standard in japan) called OI-DAKI.
Try to Google search “Rinnai + your country” to find the best way to contact them.
They will propose one of these 2 diagrams (direct or indirect connection) :
Do not ask us which one is better. Ask your plumber or your contractor and discuss the topic directly with Rinnai.
What is more important from our side is to decide which type of sockets to use for the SUCTION and for the RETURN.
The tubs are made in solid wood so a hole can be drilled on-site almost anywhere to install these sockets.
On the other hand, you will need to advise the plumber on how to secure them because the tub walls are thicker (t=42mm) than an acrylic or PVC tub.
I think there are at least 3 possible approaches:
A) use a dedicated valve.
You may also ask Rinnai but your plumber might have to customize it.
Here below is a diagram and an image photo to explain what I am talking about.
Basically, there is a mushroom-shaped valve that sucks lukewarm water from the front and returns hotter water from the slits around the base.
This is a smart solution and also has a filtering function to protect the recirculation circuits from clogging etc.
Again, I am almost sure that the valves available on the market (but maybe you would have to import from Japan) are too short to bypass the thick wood wall so your plumber will have to customize /extend it.
B) use SPA connectors
There are many makers such as Waterways, Hayward, Certkin, Jacuzzi, Pentair etc. that are producing SUCTION and RETURN fittings. Here below are 2 photos for your reference.
Also in this case chances are your plumber will need to extend the threaded part but maybe this solution offers more flexibility and the parts are more readily available.
C) use the existing FILLER SPOUT
This is a little more difficult to explain but I am sure your plumber will grasp the concept.
If you use one of our wooden spouts, you can just feed the return pipe (from the Rinnai system) inside the spout and let it gently flow from the beak of the spout! You do not even need to have a dedicated spout for this.
You can just have 2 pipes feeding the spout: one with the hot water from the wall-mounted mixer or thermostat and one from the recirculation circuit and hit two birds with a stone!
In this case, you just need a suction socket but your plumber could even use the existing drain socket for this and mount a valve outside of the tub that can be opened to drain the water from the tub once finished.
It would be ideal if your plumber could do the sucking for the circulation from the drain socket and do the return inside the spout.
You would feed also a normal premixed water pipe into the spout so it can at the same time output re-circled water and can also be used as a filler.
4) install a chofu wood burning stove
This option applies to outdoor tubs only.
Chofu is another famous Japanese maker producing wood-burning stoves that are attached directly to the back of the hot tub. Not only for re-heating, it can be also the regular hot water supply for your outdoor ofuro.
With reference to the specs of the heater and ways to connect it, please ask Chofu. https://www.chofuglobal.com/contact.html
Quite honestly, this is all we can say about our experience in re-heating or recirculating the water.
As said earlier in this article, the main problem we are concerned about is “HOW THE CONNECTION INSIDE THE TUB IS MADE.” Again, your plumber can drill holes as necessary almost anywhere as our tubs are made in solid wood.
We can also drill the holes for you if you prefer, but would definitely recommend you do it on site which gives your team much more flexibility.
One more tip: to overcome the problem of the thickness, you can either:
X) extend the fitting`s threaded connection
-or-
Y) make a trim around the hole towards the outside face (obviously) in order to reduce the thickness locally and be able to tighten the nut.
See an explanatory image below.
Yes, this photo is for an anchor bolt and not for a pipe, but you understand the concept.
I hope this article clarifies some issues and remain available for any question you may have.
Also, it is probably a good idea if you have your plumber or contractor calling me (whatsapp) or mailing me directly.
Naomi Portugaise
2022年9月27日 at 6:05 AMHello! We purchased a beautiful tub from you earlier this year and are finally at the point where we are ready to install it.
Our contractor has a question about location of intake (suction from tub) and output (heated water input back into the tub) openings.
Because of the location of our pump and setup of the room, both openings would have to be on one long sidewall.
Does the position (high or low on the wall, stacked one on top of the other, opposite corners of the wall, etc.) of each pipe matter? If so, is the suction closer to the floor of the tub? Does the heated water re-enter higher up?
If you could give us some advice on typical setup, we would greatly appreciate it.
Thank you very much for your help!!
iacopo
2022年9月27日 at 9:02 AMDear Naomi,
This is more of a spa/equipment matter rather than being related to the specifics of a wooden tub.
Consider that heating systems for bathtubs in Japan use normally one single hole with co-axial suction and inlet, so the relative position is not a high-priority issue.
Probably the best performance would be with both openings towards the bottom: as heated water raises, you may not want to suck it from the top section.
In the same way, if you were inletting hot water from the top, the water towards the bottom may remain colder.
Opposite corners towards the bottom is definitely going to work well.
Let me know if it makes sense.
Best//
iacopo
Naomi Portugaise
2022年9月29日 at 12:18 PMHello Iacopo!
That helps a LOT!!!
Thank you very much for your reply.
Our contractor will be able to finish installation for us now.
Thank you again. We are so excited to finally be able to use our gorgeous ofuro rub!!