spout details

17 – WALL MOUNTED SPOUT
This can be fixed to the wall of laid on the tub edge.The spout is easily inspectable for mainenance. The wood rim forms a kind of a dam in order to distribute water evenly in a thin layer from the wide spout. This detail is hidden inside the spout head. Plumbing is same as floor mounted type.
18 – FLOOR MOUNTED SPOUT
Basically you can feed the H&C water pipes (or premixed water) into the spout consisting of a wooden box with a “beek” sloping outwards. Plumbing will not be visible. Please be aware that this shape (column type) will be quite expensive.
19 – SPOUT SHAPES
A wall mounted spout costs about 700~800 USD (both for hinoki and asnaro) You can find here some shapes for your reference (pdf download). If you send us a sketch, we can build a spout as per your custom request.
 
20 – SPOUT CHECKLIST
Every situation is different, you should evaluate the following: 1) are you bringing in hot&cold or premiscelated water?
2) you should reduce pressure so to avoid water sprinkling under the cover (and since it is not sealed, from leaking out)
3) use 180degrees elbow to direct water away from the lid
4) do you have also a line for recirculated water?
5) you should open holes on site to match size and location of your piping
check: reference diagram for spout plumbing